Surface Preparation - Fiberglass

Pretreatment for Fiberglass

EX-2C Thinner

Precautions:

Adequate protective equipment and clothing such as rubber gloves and protective eyewear are recommended

Preparation:

If the Fiberglass has been previously painted, ensure finish is in good condition. If paint problems exist remove the old finish before re-painting.

Application:

Treat new fiberglass surfaces with a thorough solvent wash to remove all traces of paraffin and release agents. Scrub the surface with a solvent saturated scrub and then wipe clean. Scuff sand the cleaned surface with 180-220 grit sandpaper before priming.