Surface Preperation

To ensure adhesion of the coating to the substrate and prolong the coating’s service life , it is important to properly prepare the surface.
  • The surface must be dry and in sound condition.
  • All oils, dust, dirt, loose rust, peeling paint and other contaminants must be removed. Failure to do so can lead to loss of adhesion and coating failures.
  • For optimum coating performance product, substrate and ambient temperature should be between 20°C-25°C* (68°F-77°F). To prevent condensation during application the surface temperature must be 3°C (5°F) or more above the dew point at all times.
For detailed instructions please select your substrate from the drop down menu

Substrate Pre-treatment Chart

To download the Endura pre-treatment chart
(document offline for updates, please check back soon)


For information on sandblasting grades click here
To download the Sandblast Cross-Over Chart click here