EX-2C Topcoat

Category: Tag:

Description

Endura EX-2C Topcoat is a two component highly cross-linked, high performance polyurethane coating for protecting a wide range of surfaces. High gloss, color retention and outstanding resistance to chemicals, abrasion, and impacts, provide maximum protection and an impressive surface finish.

  • High gloss and color retention
  • Outstanding resistance to chemicals, abrasion & impact
  • A library of over 40,000 colors
  • Color matching service available
  • Available in high and reduced (medium, low, no) gloss
  • Pearl, Metallic and Candied finishes are also available

Product Overview

Part Numbers

Component A: Varies by color [CLRxxxxx]

Component B: FUB0100

Mix Ratio1:1
Service ConditionsHeavy Duty Topcoat
Recommended DFT1.5-2.5 mils DFT
Volume Solids (%)Volume: 43 +/- 4%
Recommended SectorOilfield, Marine, Fleet, Automotive, OEM, Architectural

Additional Product Information

EX-2C Technical Data Sheet
SDS component A*
SDS component B
Quickstart Application Guide

* SDS is for basic colors. Please click here to find SDS documents.

Looking for a VOC compliant color topcoat? Check out Endura EX-2C Low VOC topcoat.


Component B Information

EX-2C Low VOC B

For use when VOC compliance is required such as rebrand/repaint situations.

1 part by volume of component A [CLRXXXXX]

1 part by volume of component B [FUB0112]

Note: For further information on EX-2C Low VOC Colors refer to the Technical Data Sheet.

 

EX-2C H.A.T. B

For use in High Ambient Temperatures above 86ºF (30ºC)

1 part by volume of component A [CLRXXXXX]

1 part by volume of component B [FUB0071]

 

EX-2C Electrostatic B

For use with electrostatic spraying units

1 part by volume of component A [CLRXXXXX]

1 part by volume of component B [FUB0103]

 

EX-2C Special B

For use when higher viscosity is required for brush and roll applications

2 parts by volume of component A [CLRXXXXX]

1 part by volume of component B [FUB0101]

Note: For further information on EX-2C with Special B refer to the Technical Data Sheet.

 

EX-2C California B

A zero VOC B for the most stringent of VOC emission standards.

1 part by volume of component A [CLRXXXXX]

1 part by volume of component B [FUB0111]

 

EX-2C Low VOC A.C.T. B

For use when speed is critical for multiple color striping.

1 part by volume of component A [CLRXXXXX]

1 part by volume of component B [FUB2100]

Note: For further information on EX-2C Low VOC A.C.T. B refer to the Technical Data Sheet.

For questions regarding which component B is right for your application, contact your Endura representative.


Technical Bulletins

Technical Bulletin #67 – Pearl Powder in Single Stage Color Matches – January 2019