EX-2C Low VOC Color Topcoat

Category: Tags: ,


Endura EX-2C Low VOC color coat is a VOC compliant formula that meets or exceeds guidelines for VOC levels in color coats.

Endura EX-2C Low VOC Topcoat is a two component highly cross-linked, high performance polyurethane coating for protecting a wide range of surfaces. High gloss, color retention and outstanding resistance to chemicals, abrasion, and impacts, provide maximum protection and an impressive surface finish.

  • High gloss and color retention
  • Outstanding resistance to chemicals, abrasion & impact
  • A library of over 40,000 colors
  • Color matching service available
  • Available in High and reduced gloss, Pearl, Metallic and Candied finishes

Application information – EX-2C vs EX-2C Low VOC

Spraying Viscosity14 – 16 seconds12 to 13 seconds
(2 – 3 seconds less than EX-2C)
Sag Resistance2 – 3 wet mils4 – 5 wet mils
ThinningThin with EX-2C thinners or Medium Topcoat Reducer.Not generally required
Spray Equipment and setupSameSame
Paint ApplicationIt is recommended that a thinner first layer be applied at 1.0-1.5 mils.Apply two wet coats, heavier first coat followed up by a lighter second coat with 30 minutes flash off between coats.
Allow 30-45 minutes between coats.The new solvent system in the EX-2C Low VOC is much faster than regular EX-2C.
The heavier first coat allows for better flow and improved surface finish.

Product Overview

Part NumbersComponent A – varies by color – Component B – FUB0112 (1:1)
Service ConditionsHeavy Duty Topcoat
Recommended DFT1.5-2.5 mils DFT
Volume Solids (%)Volume: 43 ± 4%
Recommended SectorOilfield, Marine, Fleet, Automotive, OEM, Architectural
VOC< 420 grams/liter (3.5 lbs/gal) for all colors in Canada
< 383 grams/liter (3.2 lbs/gal) for all colors in the U.S*

VOC levels are different between Canada and the US due to the VOC exemption of Propylene Carbonate by the EPA

Additional Product Information

EX-2C Low VOC Technical Data Sheet
SDS Component A (Basic Colors)
SDS Component B
Quickstart Application Guide

SDS Component B [FUB0111]