EX-2C Topcoat

Category: Tag:

Description

Product Description

Endura EX-2C Topcoat is a two component highly cross-linked, high performance polyurethane coating for protecting a wide range of surfaces. High gloss, color retention and outstanding resistance to chemicals, abrasion, and impacts, provide maximum protection and an impressive surface finish.

  • High gloss and color retention
  • Outstanding resistance to chemicals, abrasion & impact
  • A library of over 40,000 colors
  • Color matching service available
  • Available in high and reduced (medium, low, no) gloss
  • Pearl, Metallic and Candied finishes are also available

Additional Product Info

Technical Bulletins

Technical Bulletin #67 – Pearl Powder in Single Stage Color Matches – January 2019

Other Version

Looking for a VOC compliant color topcoat? Check out Endura EX-2C Low VOC topcoat.

Product TDS and SDS Information

SDS Information

EX-2C Topcoat
SDS – Component B [FUB0100]

For use when VOC compliance is required

EX-2C Low VOC B
SDS – Component B [FUB0112]

For More information on EX-2C Low VOC,
please visit the EX-2C Low VOC Product Page

For use in when higher viscosity is required for brush and roll applications

EX-2C Special B
SDS – Component B [FUB0101]

For More information on EX-2C Special B,
please review the EX-2C Special B TDS

For use in High Ambient Temperatures above 86F (30C)

EX-2C H.A.T B
SDS – Component B [FUB0071]

For use with Electrostatic Equipment

EX-2C Electrostatic B
SDS – Component B [FUB0103]

For use in in areas that require no TBac to maintain VOC compliance

EX-2C Zero VOC California B
SDS –Component B [FUB0111]

 

EX-2C Low VOC A.C.T B
SDS – Component B [FUB2100]


Used to speed up tape time, when stripe coating, will also extended the clearcoat window up to 72 hours.
Clear coat is REQUIRED when using A.C.T B.  For More information on EX-2C A.C.T B,
please review the EX-2C A.C.T B TDS (rev 1.5)

Product Information

TECHNICAL OVERVIEW

TECHNICAL OVERVIEW​
PART NUMBERComponent A: Varies by color [CLRxxxxx] Component B: FUB0100
MIX RATIO1:1
SERVICE CONDITIONSHeavy Duty Topcoat
RECOMMENDED1.5-2.5 mils DFT
MIX RATIO1:1
VOLUME SOLIDSVolume: 40 +/- 4%
Recoat WindowCoat times are based on based on 70F and 50% RH and recommended film build
GlossHigh Gloss 90+ GU at 60 deg
ColorsSolid and Metallic Colors
SizingPints, Quarts, Gallons, 5 Gallon Pails

Recommended Uses​

Industries:​