EX-2C Low VOC Color Topcoat
Description
Product Description
Endura EX-2C Low VOC Topcoat is a two component highly cross-linked, high performance polyurethane coating for protecting a wide range of surfaces. High gloss, color retention and outstanding resistance to chemicals, abrasion, and impacts, provide maximum protection and an impressive surface finish.
- High gloss and color retention
- Outstanding resistance to chemicals, abrasion & impact
- A library of over 40,000 colors
- Color matching service available
- Available in High and reduced gloss, Pearl, Metallic and Candied finishes
- Available in Low VOC formulations compliant to 3.5 (lbs/gal) and 2.8 (lbs/gal)
- Tested to comply with FDA 21 CFR 175.300 criteria for food contact
Product TDS and SDS Information
EX-2C Low VOC Technical Data Sheet (rev 2.7)
TDS – French – EX-2C Low VOC Technical Data Sheet (rev 2.7)
TDS – Spanish – EX-2C Low VOC Technical Data Sheet (rev 2.7)
TDS – English – EX-2C Low VOC A.C.T B Technical Data Sheet (rev 2.1)
TDS – French – EX-2C Low VOC A.C.T B Technical Data Sheet (rev 2.1)
TDS – Spanish – EX-2C Low VOC A.C.T B Technical Data Sheet (rev 2.1)
A.C.T. B provides quicker tape and clearcoat times and an extended re coat window.
The perfect solutions for multi color and metallic paint jobs
ACT B MUST be Cleared
Below are links to the SDS information for EX-2C & EX-2C Low VOC (Generic and basic colors)
SDS – English – [Generic Solid Colors – Lead Free] (rev 1.4)
SDS – English – [Generic Metallic Colors – Lead Free] (rev 1.4)
SDS – French – [Generic Solid Colors – Lead Free] (rev 1.4)
SDS – French – [Generic Metallic Colors – Lead Free] (rev 1.4)
SDS – Spanish – [Generic Solid Colors – Lead Free] (rev 1.4)
SDS – Spanish – [Generic Metallic Colors – Lead Free] (rev 1.4)
Basic Colors
SDS – English – [FUA0120] (rev 1.7) – White 120
SDS – English – [FUA0125] (rev 1.4) – White 125 HH
SDS – English – [FUA0160] (rev 1.6) – Black 160
SDS – English – [CLR38538] (rev 1.4) – Red 150 LF
SDS – French – [FUA0120] (rev 1.7) – White 120
SDS – French – [FUA0125] (rev 1.4) – White 125 HH
SDS – French – [FUA0160] (rev 1.6) – Black 160
SDS – French – [CLR38538] (rev 1.4) – Red 150 LF
SDS – Spanish – [FUA0120] (rev 1.7) – White 120
SDS – Spanish – [FUA0125] (rev 1.4) – White 125 HH
SDS – Spanish – [FUA0160] (rev 1.6) – Black 160
SDS – Spanish – [CLR38538] (rev 1.4) – Red 150 LF
The SDS information above is for basic colors please click here to request color specific SDS information.
EX-2C Low VOC B – For use when VOC compliance is required
SDS – English – Component B [FUB0112] (rev 1.6)
SDS – French – Component B [FUB0112] (rev 1.6)
SDS – Spanish – Component B [FUB0112] (rev 1.6)
For More information on EX-2C Low VOC, please visit the EX-2C Low VOC Product Page
EX-2C Zero VOC California B – For use in in areas that require no TBac to maintain VOC compliance
SDS – English – Component B [FUB0111] (rev 1.3)
SDS – French – Component B [FUB0111] (rev 1.3)
SDS – Spanish – Component B [FUB0111] (rev 1.3)
EX-2C A.C.T B – For use in when to speed up tape time, when stripe coating Clear coat is REQUIRED when using A.C.T B
SDS – English – Component B [FUB2100] (rev 1.2)
SDS – French – Component B [FUB2100] (rev 1.2)
SDS – Spanish – Component B [FUB2100] (rev 1.2)
Quick Start Application Guide (rev 2.7) Low VOC B
Quick Start Application Guide (rev 2.1) A.C.T B
SDS – Australia – English – Component A [FUA0120] (rev 1.1) – White
SDS – Australia – English – Component A [FUA0160] (rev 1.1) – Black
SDS – Australia – English – Component A [FUB0112] (rev 1.1) Low VOC B
Application information – EX-2C vs EX-2C Low VOC
| EX-2C | EX-2C Low VOC | |
|---|---|---|
| Spraying Viscosity | 14 – 16 seconds | 12 to 13 seconds |
| Unreduced | Unreduced | |
| (2 – 3 seconds less than EX-2C) | ||
| Sag Resistance | 2 – 3 wet mils | 4 – 5 wet mils |
| Thinning | Thin with EX-2C thinners or Medium Topcoat Reducer. | Not generally required |
| Mixing | 1:1 | 1:1 |
| Spray Equipment and setup | Same | Same |
| Paint Application | It is recommended that a thinner first layer be applied at 1.0-1.5 mils. | Apply two wet coats, heavier first coat followed up by a lighter second coat with 30 minutes flash off between coats. |
| Allow 30-45 minutes between coats. | The new solvent system in the EX-2C Low VOC is much faster than regular EX-2C. | |
| The heavier first coat allows for better flow and improved surface finish. |
Product Information
TECHNICAL OVERVIEW
| TECHNICAL OVERVIEW | |||
|---|---|---|---|
| PART NUMBERS | Component A - varies by color Component B - FUB0112 (1:1) | ||
| SERVICE CONDITIONS | Heavy Duty Topcoat | ||
| RECOMMENDED DFT | 2.0 – 4.0 mils DFT | ||
| VOLUME SOLIDS | Volume: 46% ± 2% | ||
| VOC | < 420 grams/liter (3.5 lbs/gal) for all colors in Canada < 383 grams/liter (3.2 lbs/gal) for all colors in the U.S* Available in 2.8 lbs/gal version | ||
| Colors | A library of over 40,000 colors | ||
| Gloss | High Gloss 90+ GU at 60 deg | ||
| Sizing | Pints, Quarts, Gallons, 5 Gallon Pails | ||
Recommended Uses
- Industries:
- Oilfield
- OEM
- Construction Equipment and Cranes
- Waste and Recycling Industry Garbage Trucks
- Trailers and Rolling Stock
- Fleet and Automotive
- Architectural
