Clarity Clear
Description
Product Description
Clarity Low VOC Clear is a two component highly cross-linked, high performance polyester polyurethane clear coating. Endura Clarity Low VOC Clear is a clear coating designed to give extra protection to solid, metallic and pearl colors.
- Excellent protection against acids and alkalies
- Exceptional ultraviolet light protection
- Exceptional abrasion resistance
- VOC Compliant
Product TDS and SDS Information
Clarity Clear Low VOC Technical Data Sheet (rev 1.6)
SDS – English – Component A [FUA0137] (rev 1.2)
SDS – English – Component B [FUB0112] (rev 1.4)
Quick Start Application Guide (rev 1.6)
TDS – French – Clarity Clear Low VOC Technical Data Sheet (rev 1.6)
SDS – French – Component A [FUA0137] (rev 1.2)
SDS – French – Component B [FUB0112] (rev 1.4)
TDS – Spanish – Clarity Clear Low VOC Technical Data Sheet (rev 1.6)
SDS – Spanish – Component A [FUA0137] (rev 1.2)
SDS – Spanish – Component B [FUB0112] (rev 1.4)
Product Information
TECHNICAL OVERVIEW
| TECHNICAL OVERVIEW | |
|---|---|
| PART NUMBERS | Component A – FUA0137 – Component B – FUB0112 |
| SERVICE CONDITIONS | Heavy Duty Clear |
| RECOMMENDED DFT | 1-2 mils DFT |
| VOLUME SOLIDS | 40% ± 1% |
| VOC | 246 grams/liter (2.06 lbs/gal) |
| Color | Solid and Metallic Colors |
| Gloss | High Gloss 90+ GU at 60 deg |
Recommended Uses
- Industries:
- Oilfield
- OEM
- Construction Equipment and Cranes
- Waste and Recycling Industry Garbage Trucks
- Trailers and Rolling Stock
- Fleet and Automotive
- Architectural
Application information – EX-2C Clear 100 VS Clarity Low VOC
| Clear 100 | Clarity Low VOC | |
|---|---|---|
| Spraying Viscosity | 14 – 16 seconds | 12 to 13 seconds |
| Unreduced | Unreduced | |
| (2 – 3 seconds less than Clear 100) | ||
| Sag Resistance | 2 – 3 wet mils | 4 – 5 wet mils |
| Thinning | Thin with EX-2C thinners or Medium Topcoat Reducer. | Not generally required |
| Mixing | 1:1 | 1:1 |
| Spray Equipment and setup | Same | Same |
| Paint Application | It is recommended that a thinner first layer be applied at 1.0-1.5 mills. | Apply two wet coats, heavier first coat followed up by a lighter second coat with 30 minutes flash off between coats. |
| Allow 30-45 minutes between coats. | The solvent system in Clarity Low VOC is much faster than Clear 100. | |
| The heavier first coat allows for better flow and improved surface finish. |
